Reevo Resources | Rubber Lining – Level 4

Course Prerequisite(s)

Please note that this course has the following prerequisites which must be completed before it can be accessed
Rubber Lining – Level 3 – Code #: RLQ-3

About Course

Rubber Lining Level 4 (Code #: RLQ-4) aims to provide consistent and reliable outcomes for all stakeholders in the delivery of Rubber Lining projects both in a workshop and site setting. Establish training needs of a given Rubber Lining Technician, whether a new starter or an experienced tradesman. The training program will run based on peer review evaluation of the current skills of the Rubber Lining Technician, verification of competency and setting achievable training and development targets as required.

RLQ-4 is based on the following principles:

Consistent Outcomes: tangible benefits regarding project assignment of personnel to specific tasks that match their level of competency. Leading to predictable, efficient, quality outcomes with built-in SOPs.

Skills Verification and Verifiable Records: Project Stakeholders can verify via Training Records that the Rubber Lining technicians meet the skill requirements for the type of Rubber Lining Project and complexity level.

Development of Personnel: Rubber Lining Technicians develop further skills and confidence in their own ability leading to increased job satisfaction and improved quality workmanship conducted in a safe manner – a “Win Win” for all stakeholders.

Sharing of Knowledge and Innovation: the training will lead to greater cohesion in the Rubber Lining Industry where all Stakeholders work to a consensus based on industry best practice and shared knowledge leading to innovation.

Scalable benefits: as the training program comes online, over time there will be scale benefits through targeted training needs based on individual skills assessments leading to career development opportunities for the trainee and accelerated growth efficiencies for Employers and Project Stakeholders.

RLQ-4 – Case Studies - Building on Levels RLQ-1 to RLQ-3.
Mastery of All Rubber Lining Complexities: Safely execute all levels of rubber lining, handling complex projects with consistent quality.
Advanced Skive Cutting and Template Preparation: Use the push knife for advanced skive cutting and prepare complex templates, including specialized pipe linings like concentric and eccentric reducers.
Project Supervision for Large-Scale Jobs: Effectively supervise large projects over 200 square meters, ensuring they are completed according to the scope of work and remain on target.
High-Level Safety Standards: Attain and maintain a high level of safety in both workshop and site operations.
Client Liaison and Temporary Site Contract Management: Act as the primary contact for clients and temporarily take over the site contract manager role when needed.
Oversee Occupational Health & Safety (OH&S), conduct QA/QC inspections, and report on project quality.
Leadership in Training and Development: Assess team members' skills, identify areas for improvement, and manage developmental training needs.
Supervise site curing and hot lining rubber applications in the workshop.
Autoclave and On-Site Vulcanisation Expertise: Operate autoclaves competently for all rubber compounds, including Nitrile, Hypalon, Bromobutyl, and Ebonite. Understand and competent in on-site vulcanisation of rubber linings.
Project Estimation and Execution: Plan, estimate, and quote for large-scale rubber lining projects, ensuring precision in both planning and execution.

Course Content

Rubber Lining – Level 4 – Code #: RLQ-4

1. Case Study #1 – Part 1: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

00:00
2. Case Study #1 – Part 2: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

00:00
3. Case Study #1 – Part 3: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

00:00
Quiz 1 – Case Study #1 – Lessons 1 to 3
4. Case Study #2 – Part 1: Rubber Lining of Demin Water Treatment Vessels with Pre-Vulcanized BIIR CN Rubber

00:00
5. Case Study #2 – Part 2: Rubber Lining of Demin Water Treatment Vessels with Pre-Vulcanized BIIR CN Rubber

00:00
6. Case Study #2 – Part 3: Rubber Lining of Demineralised Water Treatment Vessels with Pre-Vulcanised BIIR Soft Rubber

00:00
Quiz 2 – Case Study #2 – Lessons 4 to 6
7. Case Study #3 – Part 1: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

00:00
8. Case Study #3 – Part 2: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

00:00
9. Case Study #3 – Part 3: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

00:00
Quiz 3 – Case Study #3 – Lessons 7 to 9
10. Case Study #4 – Part 1: Rubber Lining of an On-Site Phosphoric Storage tank with Self-Vulcanising BIIR soft rubber lining

00:00
11. Case Study #4 – Part 2: Rubber Lining of an On-Site Phosphoric Storage tank with Self-Vulcanising BIIR soft rubber lining

00:00
Case Study #4 – Part 3: Rubber Lining of an On-Site Phosphoric Storage tank with Self- Vulcanising BIIR soft rubber lining

00:00
Quiz 4 – Case Study #4 – Lessons 10 to 12
13. Case Study #5 – Part 1: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

00:00
14. Case Study #5 – Part 2: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

00:00
15. Case Study #5 – Part 3: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

00:00
Quiz 5 – Case Study #5 – Lessons 13 to 15
16. Further Activity – Practical

00:00

Student Ratings & Reviews

No Review Yet

+61 (0) 420 644 283

Australia | SE Asia | Africa | Middle East

Rubber Lining – Level 4 – Code # RLQ-4

Course Prerequisite(s)

About Course

RLQ-4 is based on the following principles:

Consistent Outcomes: tangible benefits regarding project assignment of personnel to specific tasks that match their level of competency. Leading to predictable, efficient, quality outcomes with built-in SOPs.

Skills Verification and Verifiable Records: Project Stakeholders can verify via Training Records that the Rubber Lining technicians meet the skill requirements for the type of Rubber Lining Project and complexity level.

Development of Personnel: Rubber Lining Technicians develop further skills and confidence in their own ability leading to increased job satisfaction and improved quality workmanship conducted in a safe manner – a “Win Win” for all stakeholders.

Sharing of Knowledge and Innovation: the training will lead to greater cohesion in the Rubber Lining Industry where all Stakeholders work to a consensus based on industry best practice and shared knowledge leading to innovation.

What Will You Learn?

Course Content

Rubber Lining – Level 4 – Code #: RLQ-4

1. Case Study #1 – Part 1: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

2. Case Study #1 – Part 2: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

3. Case Study #1 – Part 3: Rubber Lining of an Evaporative Flash Cooler Vessel with Hard Rubber

Quiz 1 – Case Study #1 – Lessons 1 to 3

4. Case Study #2 – Part 1: Rubber Lining of Demin Water Treatment Vessels with Pre-Vulcanized BIIR CN Rubber

5. Case Study #2 – Part 2: Rubber Lining of Demin Water Treatment Vessels with Pre-Vulcanized BIIR CN Rubber

6. Case Study #2 – Part 3: Rubber Lining of Demineralised Water Treatment Vessels with Pre-Vulcanised BIIR Soft Rubber

Quiz 2 – Case Study #2 – Lessons 4 to 6

7. Case Study #3 – Part 1: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

8. Case Study #3 – Part 2: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

9. Case Study #3 – Part 3: Rubber Lining of Concrete CCD with Pre-Vulcanized BIIR Rubber applied to the walls and Geo-membrane applied to floor

Quiz 3 – Case Study #3 – Lessons 7 to 9

10. Case Study #4 – Part 1: Rubber Lining of an On-Site Phosphoric Storage tank with Self-Vulcanising BIIR soft rubber lining

11. Case Study #4 – Part 2: Rubber Lining of an On-Site Phosphoric Storage tank with Self-Vulcanising BIIR soft rubber lining

Case Study #4 – Part 3: Rubber Lining of an On-Site Phosphoric Storage tank with Self- Vulcanising BIIR soft rubber lining

Quiz 4 – Case Study #4 – Lessons 10 to 12

13. Case Study #5 – Part 1: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

14. Case Study #5 – Part 2: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

15. Case Study #5 – Part 3: Rubber Lining of a Steel Clarifier with Pre-Vulcanized BIIR Rubber

Quiz 5 – Case Study #5 – Lessons 13 to 15

16. Further Activity – Practical

Contact

Members Of